BooTunes and BooTunes Amped Version History
-------------------------------------------

Version 1.62 - April 4, 2019
- Changes to Binary 2 mode
  - Ambient will now start and loop correctly after a triggered sound.
  - Added _NOLOOP option on strobe input so strobe could stay active wihtout
    playing a sound if necessary.
  - Improved support for _SELFINT option.

Version 1.61 - September 13, 2018
- Fixed an issue where some BooTunes Amped would get stuck in a reset loop at boot.

Version 1.60 - December 2, 2017
- Added a much improved Binary mode. (408 model only, 418 does not have enough inputs)
- Fixed a bug where the first fade in with the RESUME feature was way too long.

Version 1.51 - August 29, 2017
- Fixed a bug where _PODLY would cause DMX Master mode to send extra play commands to slaves.

Version 1.50 - August 24, 2017
- Fixed a bug where triggered sounds couldn't be interrupted in BINARY mode.

Version 1.49 - July 4, 2017
- Fixed a bug where Binary mode wouldn't work if an AMBIENT sound was present.

Version 1.48 - Feb 1, 2017
- Tweaked the random (_RND) option so it works a bit better with the AMBIENT
folder. It is still required that an input is triggered at least once to seed
the random number generator.

Version 1.47 - Dec 21, 2016
- Changed _NOLOOP option to function like single shot inputs.  It will allow
the input to signal a sound once, after which the input will be ignored
until it is released and reasserted.

Version 1.43 - Nov 11, 2016
- Added a random play (_RND) feature to the INPUT folders.  It can be
used with the AMBIENT folder as well as long as the triggers are also used
occasionally.

Version 1.41 - Oct 24, 2016
- Renamed Pre and Post delay directives so 3 digit numbers can be used
  New names are now _PRED### and _POSD###

Version 1.40 - Oct 22, 2016
- Added trigger Pre and Post delay timers (_PRDLY## and _PODLY##)

Version 1.32 - Oct 20, 2016
- _NEXT option now also forces next track even for non-interruptible sounds

Version 1.31 - May 24, 2016
- Fixed issue where _FADINTX fade options would always be 1 second.

Version 1.30 - Dec 22, 2015
- Fixed an issue where BUSY output wasn't working correctly.

Version 1.29 - May 12, 2015
- Fixed busy output bug

Version 1.27 - Oct 07, 2014
- Added _LOOPALL and _PLAYALL options
- Inputs are now debounced before sending cmds to slave BooTunes

Version 1.26 - Aug 30, 2014 
- Added _LOOPONE option
- DMX mode now ignores calls to Ambient

Version 1.24 - Feb 6, 2014 
- Fixed a bug in Binary input mode


Version 1.22 - Oct 24, 2013
- _RESUME now works in any folder
- New option _NOLOOP prevents an input from playing again if the input is
held on.
- New _TMR#### option till trigger input 1 every #### seconds.
- New _NOSTEP option sets an input so that it can't step on another, even
if that input is interruptible.
- Fixed a few bugs with _HOLD and _FADINT features.
- Few other bug fixes

v1.19 - May 22, 2013
- Added global setting option _NOMUTE to prevent amp from muting.  
Required for Mix In input to be amplified at all times.

v1.18 - May 7, 2013
- Amp on BooTunes Amped is now muted after 3 seconds of silence.  S
Saves power and reduces heat. 

v1.17 - Mar 25, 2013
- Added support for revised BooTunes FI-408c and BooTunes Amped FI-418
- DMX Master mode now waits for slaves to power up
- Busy output only turns on for triggered audio, not ambient sounds

v1.12 - Aug 29, 2012
- Added DMX slave and master options
- Added volume control, fading, and ducking options
- Added pause, next, prev options
- Added Ambient resume option

-- PREVIOUS VERSIONS --

v1.07 - Jul 13, 2011
- Fixed an issue where higher bitrate MP3s sounded aweful.  This
only affected models sold in 2011.

Sep 14, 2009
- Added Binary mode so up to 128 sounds can be addressed directly

Aug 11, 2009
- Fixed bug where the ends of very low bitrate songs would not play