Wireless Trigger (4 Outputs)


Remotely trigger up to four devices

Availability: 2 In Stock.


Product Description

The module has four relays (7 amps max per) on screw down terminal blocks. PicoBoos, BooBoxs, lights, or any other device that can be triggered from a relay can now be activated wirelessly. Use with any of our controllers and audio players or your own devices with trigger input.

Package Includes:

  • 1 x Control Switch Board with four 7-amp relays on it
  • 1 x Remote Control with four buttons

Requires a 12VDC Power Supply. If you are powering from another device (such as a PicoBoo) then you will not require one.

  • Channels: 4CH
  • Remote Control Distance: 100m / 300 ft
  • Encoding: Fixed code, soldering
  • Power Supply: 1 x 23A-12V battery
  • Size: 58 x 39 x 16mm

  • Channels: 4 CH
  • Control Modes: Toggle / Momentary / Latched / Toggle+Momentary
  • Decode: Learning code
  • Required Power Supply: DC 12V (not included)
  • Relays: 10A / 120V AC, 20A /14V DC
  • Working Voltage Range of Relay: AC 110-240V or DC 0-28V
  • Board Size: 68 x 48 x 20mm
  • Static Current: <=6mA
  • Working Frequency: 315 MHz

      Please Note:

      • Actual antenna range will vary greatly depending on the installation and operating environment

Downloads and Documentation

Operating Manual  Download

Additional Information

Range 300 Feet
Output Capacity 7 Amps Each, 120VAC Max.
Output Type Relays
Supply Current 10 - 120mA
Supply Voltage 12 VDC