Full Motion Character
As low as $1,064.99
- Full Motion Head
- New Plug and Play mode!
- RGB LED Eyes move Left and Right
- Can also be controlled via DMX
Usually ships in 1 week
Custom Skull Design
The Full-Motion Character platform was developed to provide a wide range of movement at a reasonable cost.
Plug and Play Mode
The Full-Motion Characters ship with our ServoDMX controller. The controller has already been calibrated to the character and setup in a "Plug and Play" mode. Simply plug the included 3.5mm (1/8") audio cable into an audio source and it'll come to life. You can easily adjust the amount of random movement, eye color, or audio sensitivty.
Note that in this mode the vocal track needs to be in the left or right audio channel all by itself. Any sound effects or music must be in the opposite channel.
The Full-Motion Skulls can also be fully controlled via DMX. This allows one or more characters to be part of a show where every movement is scripted and synced with a soundtrack. A DMX controller would also allow you to control pneumatics, lighting, atmospheric effects, and more.
If you don't have a DMX source, adding the items below to your order would give you everything you need.
The full motion skull has a 3/8" shaft coupling about an inch below the skull's center plate. The coupling is designed to receive a 3/8" shaft of some kind, threaded or un-threaded. You must provide this rod. The coupling is secured to the rod by some set screws you can tighten with an Allen key.