The Evolution of Haunt Control: Hardware Reliability Meets Software Intelligence
For over two decades, FrightIdeas has been the backbone of the world’s most terrifying attractions. We know that in the heat of the season, you need gear that just works. That’s why our new product line doesn’t abandon the "Plug-and-Play" philosophy—it supercharges it.
These aren't just controllers, they are the eyes and ears of your attraction. By integrating WiFi into our core architecture, we’ve moved prop telemetry out of the shadows and onto your screen. Whether you’re managing a single-room garage haunt or a multi-million dollar professional scream-park, our new ecosystem delivers real-time data directly to your desktop or pocket. This isn't just about triggering a scare, it’s about having a level of oversight and creative command never before seen in the industry!
All WiFi and Cloud features are completely optional. If you prefer to stay off the grid, you can disable all wireless features and program your props using the onboard buttons just like you always have. For power users who want total control without the cloud, you can even host your own local server.
Turn Your Controllers into a Real-Time Haunted Heat Map
In the past, knowing where your patrons were required squinting at grainy CCTV monitors or relying on radio chatter from actors. With the new FrightIdeas ecosystem, every motion sensor and pressure pad becomes a data point. Our integrated Virtual Floor Plan allows you to upload a map of your attraction and "pin" your controllers to their physical locations. And since each Pico controller reports its trigger status instantly over WiFi, your floor plan comes to life as the night begins.
Precision Through Density
The magic of this system lies in its scalability. The more controllers you integrate into your haunt, the higher the resolution of your tracking:
The Big Picture: Even with just a few controllers, you can see which "zones" are currently active, helping you identify if a group is moving too fast or stalling in a specific scene.
Granular Precision: Scale your visibility as you scale your haunt. With a dense network of controllers, you can watch a group’s journey in high fidelity: see them enter a scene, trigger a drop-down scare, and move toward the exit door. Every Pico unit acts as a digital breadcrumb, giving you a frame-by-frame view of your show’s performance.
Visualizing the Flow: Watch the "pulse" of your haunt in real-time. On any laptop or tablet, you’ll see icons light up in sequence as patrons move through the halls. If a section of your map stays "dark" for too long, you know there's a gap in the line; if an entire wing stays "lit," you know a group has stopped to take a selfie and is backing up your show.
Total Control, No Strings Attached
We understand the "what-ifs" of live entertainment. That’s why our WiFi features are built to be additive, not restrictive.
Offline First: No internet? No problem. The onboard buttons and internal memory ensure your show goes on even if the router or internet goes down.
Total Local Control: Whether you’re concerned about privacy or operating in a location without reliable internet, we’ve got you covered. You can host your own local server to keep your haunt’s ecosystem completely self-contained. This ensures lightning-fast response times and 100% uptime, even if the rest of the world goes offline. Your show stays running, and your data stays on-site.
Command Center: Configure and Animate from Your Desktop
Our new Web Interface brings professional-grade sequencing to any laptop or desktop, mac or PC.
Remote Configuration: Change trigger delays, output behaviors, and audio levels for any device on your network with a few clicks.
Live Animation: Use your keyboard or mouse to record complex movements in real-time. Watch the prop react instantly as you map out the perfect scare.
Global Updates: Need to adjust a trigger delay or volume? Update multiple devices simultaneously without leaving your chair.
Health Dashboard: Monitor system vitals, check connection strengths, and ensure every controller is "heartbeating" before the doors open.
A dedicated desktop app for Mac and PC will be available later this year.
The Haunt in Your Pocket: Mobile Control on the Move
Our mobile interface allows you to monitor and diagnose issues from the palm of your hand. Check the status of any controller, verify input voltages, or test a mechanical movement while you’re standing right in front of the prop.
The Virtual Control Pad: Every device features a digital "Remote Control" mode. Test each output one by one, or trigger the entire sequence from your phone.
Live Activity Tracking: Check your Device List to see which props are currently active. If a prop stops triggering or a beam sensor goes out of alignment, you'll know instantly.
Fault Notifications: The mobile app can notify you immediately if a device has lost power or an air loop is low on pressure, allowing your tech team to intercept issues before the patrons even notice.
SHIPPING STARTS IN MAY
PRE-ORDERS WILL OPEN SOON
PicoLink | Intelligent Air Management - $99
On a busy Saturday night, compressed air is your haunt’s most valuable resource. The PicoLink pressure monitor collects real-time data from your lines and shares it across your entire network, transforming a "dumb" air loop into a smart, responsive system.
Smart Subscription Technology: Any controller in your haunt can "subscribe" to a PicoLink. Now, your high-volume, less-critical props can automatically throttle their cycles or pause briefly if they detect the main pressure is dropping, giving your compressor a chance to breathe.
Active Prop Protection: Prevent sluggish movements and mechanical strain caused by low-pressure cycles. You can configure your high-value animatronics to remain idle until the system reaches a safe operating minimum, ensuring every scare is performed at full power and protecting your hardware from unnecessary wear.
Visualize Your Air: Don't just see the current PSI—see the trend. Use the cloud to view historical pressure graphs, allowing you to identify slow leaks, predictable compressor fatigue, or system bottlenecks before they cause a shutdown.
Instant Fault Alerts: Use the onboard dedicated output to trigger a strobe, siren, or beacon the moment pressure hits a critical low, alerting your tech team instantly.
Scalable Architecture: Whether you’re monitoring a single portable compressor or a massive facility with multiple air loops, PicoLink scales with you. Add as many sensors as you need to map out your entire pneumatic network.
Note: Each PicoLink requires a 4-20mA pressure transmitter (purchased separately).
PicoLite - $64.99
Compact. Connected. Capable.
PicoLite is a streamlined controller ideal for smaller props or distributed effects.
Features:
- 2 trigger inputs
- 2 solid-state outputs
- Built-in WiFi
- Remote configuration and monitoring
- No onboard audio
Perfect for compact installations where audio isn’t required but network visibility is.
PicoRelay - $149.99
Maximum Flexibility with Built-In Audio
PicoRelay combines versatile output options with powerful onboard sound.
Features:
- 2 trigger inputs
- 4 relay outputs
- MP3 audio playback
- 10MB internal storage (expandable via microSD)
- Integrated 60-watt audio amplifier
- WiFi configuration and cloud monitoring
Ideal for complex props requiring flexible switching and high-impact audio — all in one device.
PicoDrive - $159.99
Motor Control Done Right
PicoDrive is purpose-built for DC motor-driven props — especially wiper motor applications requiring consistent reset positioning.
Features:
- 2 trigger inputs
- 1 DC motor output
- Park switch detection for consistent stopping position
- 2 relay outputs
- MP3 audio playback
- 10MB internal storage (expandable via microSD)
- Integrated 60-watt amplifier
- Full WiFi connectivity
Precision motor control meets powerful audio and remote management.
PicoPro
$139.99 - 4 Outputs
$179.99 - 8 Outputs
Scalable Power for Larger Effects
PicoPro is the most versatile controller in the Pico lineup.
Available with 2, 4, or 8 solid-state outputs, it scales to match your prop’s complexity.
Features:
- 2 trigger inputs
- 2 / 4 / 8 solid-state outputs
- MP3 audio playback
- 10MB internal storage (expandable via microSD)
- Integrated 60-watt amplifier
- WiFi configuration and cloud monitoring
From single effects to multi-output animated scenes, PicoPro delivers professional-grade control with modern connectivity.