PicoLink

For more information read about our Evolution in Haunt Control

On a busy Saturday night, compressed air is your haunt’s most valuable resource. The PicoLink pressure monitor collects real-time data from your lines and shares it across your entire network, transforming a "dumb" air loop into a smart, responsive system.

Smart Subscription Technology
Any controller in your haunt can "subscribe" to a PicoLink. Now, your high-volume, less-critical props can automatically throttle their cycles or pause briefly if they detect the main pressure is dropping, giving your compressor a chance to breathe.

Active Prop Protection
Prevent sluggish movements and mechanical strain caused by low-pressure cycles. You can configure your high-value animatronics to remain idle until the system reaches a safe operating minimum, ensuring every scare is performed at full power and protecting your hardware from unnecessary wear.

Visualize Your Air
Don't just see the current PSI—see the trend. Use the cloud to view historical pressure graphs, allowing you to identify slow leaks, predictable compressor fatigue, or system bottlenecks before they cause a shutdown.

Instant Fault Alerts
Use the onboard dedicated output to trigger a strobe, siren, or beacon the moment pressure hits a critical low, alerting your tech team instantly.

Scalable Architecture
Whether you’re monitoring a single portable compressor or a massive facility with multiple air loops, PicoLink scales with you. Add as many sensors as you need to map out your entire pneumatic network.

Pressure Transmitter
Each PicoLink requires a 4-20mA pressure transmitter (can be added separately above). The pressure sensor will have a maximum pressure of 174 or 232 PSI depending on availability.